technical data sheet 7/16 straight plug 60S131-272B1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/11.05/3.1 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-4, vg 95250, en 122190, din 47223 documents assembly instruction 60 s21 material and plating connector parts material plating center contact brass silver, 3-6 m outer contact brass silver, 3-6 m dielectric ptfe gasket silicone coupling nut brass flash white bron ze over silver(e.g. optargen?)
technical data sheet 7/16 straight plug 60S131-272B1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/11.05/3.1 electrical data impedance 50 ? frequency dc to 7.5 ghz return loss ? 35 db, dc to 1 ghz ? 30 db, 1 ghz to 2.5 ghz ? 25 db, 2.5 ghz to 5 ghz insertion loss ? 0.05 db insulation resistance ? 10 4 m ? center contact resistance ? 0.4 m ? outer contact resistance ? 1.5 m ? working voltage (at sea level) 500 v rms, 50 hz rf-leakage ? 128 db up to 1 ghz intermodulation (3 rd order) ? -115 dbm @ 2 x 20 w - limitations are possible due to the used cable type - mechanical data mating cycles ? 500 center contact captivation: axial ? 200 n radial ? 2 ncm coupling torque (recommended) 25 to 30 nm proof torque max. 35 nm environmental data temperature range -55c to +155c rapid change of temperature din en 122190, clause 4.6.7 corrosion salt mist din en 122190, clause 4.6.10 vibration din en 122190, clause 4.6.3 damp heat din en 122190, clause 4.6.6 climatic tests din en 122190, clause 4.6.5 (55/155/56) degree of protection (mated pair) iec 60529, ip67 rohs compliant tooling n/a suitable cables rtk-fs 141, ut 141, rg 402 weight weight 97 g/pce draft date approved date rev. engineering change number name date hauke schtt 19/04/05 j_gramsamer 07.04.15 e00 15-0397 j_krautenb. 07.04.15 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
